PCB抄板行业的新秀：易博抄板工作室。我们这里可为您提供优质PCB抄板，PCB设计，芯片解密，PCB改板，IC解密，SMT贴片等服务以及PCB行业相关信息，选择PCB原理图设计，BOM制作等。

以下我们对W77E532A单片机基本功能特征的简单介绍，仅供参考：

特征

The W77E532A is a fast 8051 compatible microcontroller with a redesigned processor core without wasted clock and memory cycles. As a result, it executes every 8051 instruction faster than the original 8051 for the same crystal speed. Typically, the instruction executing time of W77E532A is 1.5 to 3 times faster then that of traditional 8051, depending on the type of instruction. In general, the overall performance is about 2.5 times better than the original for the same crystal speed. Giving the same throughput with lower clock speed, power consumption has been improved. Consequently, the W77E532A is a fully static CMOS design; it can also be operated at a lower crystal clock. The W77E532A contains In-System Programmable(ISP) 128 KB bank-addressed Flash EPROM; 4KB auxiliary Flash EPROM for loader program; operating voltage from 4.5V to 5.5V; on-chip 1 KB MOVX SRAM; three power saving modes.

8-bit CMOS microcontroller

Wide supply voltage of 4.5V to 5.5V

High speed architecture of 4 clocks/machine cycle runs up to 40 MHz

Pin compatible with standard 80C52

Instruction-set compatible with MCS-51

Four 8-bit I/O Ports; Port 0 has internal pull-up resisters enabled by software

One extra 4-bit I/O port, chip select and Wait State control signal (available on 44-pin PLCC/QFP package)

Three 16-bit Timers

12 interrupt sources with two levels of priority

On-chip oscillator and clock circuitry

Two enhanced full duplex serial ports

Dual 64KB In-System Programmable Flash EPROM banks (APFLASH0 and APFLASH1)

4KB Auxiliary Flash EPROM for loader program (LDFLASH)

256 bytes scratch-pad RAM

1 KB on-chip SRAM for MOVX instruction

Programmable Watchdog Timer

Software Reset

Dual 16-bit Data Pointers

Software programmable access cycle to external RAM/peripherals

更多芯片解密，ic解密技术资料请查阅 http://www.pcb-sz.com